Clik here to view.
I-Beam Reinforcement: Top flange tab
Use the Top flange tab to define the meshes in the top flange of the I-Beam.SymmetricThe user can define if the zones will be symmetrical or not.If the user selects symmetrical = Yes, then the zone 1 =...
View ArticleClik here to view.
I-Beam Reinforcement: Stem mesh tab
Use the Stem mesh tab to define meshes in the I-Beam stem.Cover thicknessThe cover thickness of the most outside meshes and for openings can be entered here.ZonesThe beam is divided into 5 different...
View ArticleClik here to view.
I-Beam Reinforcement: Picture tab
Use the Picture tab to define types of reinforcing bars and their cover thickness from the IBeam front view.Reinforcing barsThe user can select the reinforcing bars size for the longitudinal and U bars...
View ArticleHollow Core Checker
1. Purpose and descriptionHollow Core Checker is an addition to Tekla Structures extension Model Checker Suite.Hollow Core Checker adds a check to Model Checker Suite allowing you to perform various...
View ArticleForm Face Creator
The Form Face Creator extension is used to add surface treatment representation of formwork to part surfaces. This enables the user to get very accurate reports of the formwork areas in their model.
View ArticlePEB Splice
The PEB Splice plugin allows you to create a splice plate connection between two PEB Members. It can be used as
View ArticlePEB Frames
The PEB Frames application allows you to create PEB frames with a set of pre-set values.How to locateInstallers are available at Pre-Engineered Building Tools for Tekla Structures version 21.0 and...
View ArticlePEB Knee
The PEB Knee plugin allows you to create the desired knee at the column and rafter (beam) junction.How to locateInstallers are available at Pre-Engineered Building Tools for Tekla Structures version...
View ArticlePEB End Plate to Flange
The PEB End Plate to Flange plugin allows you to create an end plate connection between a PEB Member connecting member end to a PEB Member flange. The connection is similar to a seating / end plate...
View ArticlePEB Base Plate
The PEB Base Plate plugin allows you to create a base plate detail at the start of PEB Member.How to locateInstallers are available at Pre-Engineered Building Tools for Tekla Structures version 21.0...
View ArticlePEB Member Updater
The PEB Member updater plugin allows you to modify the PEB Members after applying a PEB Connection at the ends.How to locateInstallers are available at Pre-Engineered Building Tools for Tekla...
View ArticlePEB Member
The PEB Member plugin allows you to create a PEB built-up member with multiple depths (up to 6), multiple webs (up to 5), and multiple flanges (up to 5). You can adjust any part property (web, flange)...
View ArticlePEB Ridge Rafter
The PEB Ridge Rafter is an application made on top of the PEB Member component. This tool will create a ridge rafter for basic PEB ridge rafter requirements. It can create 3 inner flanges, 3 outer...
View ArticleMulti Depth Stiffener
The Multi Depth Stiffener plugin allows you to create multiple stiffeners (profiles/plates) at given distances on the beam plate or contour plate. It is useful for creating stiffeners in a PEB Member,...
View ArticleUS Custom Variables
1. Purpose and descriptionThis set of custom variables extends the reporting capabilities of Tekla Structures. These variable are available throughout the system: reports, marks as templates, drawings,...
View ArticleAdvanced Grid Labels
This plug-in gives the user more possibilities to define the grid labels. Grid labels can be defined with an extra text. This text can be freely defined in the model and shown on the drawing.
View ArticleLifting Lug and Lifting Lug Manager
ContentsPurpose and descriptionSystem RequirementsInstalling the extensionUsing the extensionAdditional informationPurpose and descriptionIn certain countries Health and Safety regulations do not allow...
View ArticleSave Grid To File
1. Purpose and descriptionThe Save Grid To File extension allows the user to save and load grid(s) that can't be saved in the out-of-the-box grid dialog box. This includes directly modified grids and...
View ArticleBCF Comment Tool
This is the new version of the Comment Tool. The BCF Comment Tool supports the final version of the BCF 2.0 standard to enable full collaboration between disciplines.
View Article